For the cost saving and
power management
purpose, PLANET releases
a new Power over
Ethernet Injector
POE-151.
The POE-151 is an IEEE
802.3af Power over
Ethernet Injector that
provides DC 48V over
Ethernet cables. The
POE-151 IEEE 802.3af
Power over Ethernet
Injector inserts DC
Voltage into Cat.5
cable, allowing the
cable between the
Injector (POE-151) and
Splitter
(POE-151S-5V/9V/12V) to
transfer data and power
simultaneously. The
maximum distance between
the Injector (POE-151)
and Splitter
(POE-151S-5V/9V/12V) is
100 meters. With POE-151
being installed, it
combines the Ethernet
digital data with power
over the twisted pair
cables as an IEEE
802.3af Power over
Ethernet Injector. And
the IEEE 802.3af Power
over Ethernet splitter
shall separate the
digital data and the
power into two outputs.
With IEEE 802.3af Power
over Ethernet devices
being installed, the
system administrator
only has to use a single
RJ-45 Ethernet cable to
carry both power and
data to each device.
Besides, to connect
through POE-151 and
POE-151S-5V/9V/12V, you
could also have benefits
including cost saving,
easy for networking
planning and higher
reliability. What's
more, upon any IEEE
802.3af devices being
installed, the POE-151
or together with
POE-151S-5V/9V/12V can
make the connection
while migrating or
splitting the power and
the Ethernet digital
packets, such as
connecting the POE-151
to an IEEE 802.3af
complied devices, AP or
IP phone.
Product
Application
Connect to IEEE
802.3af devices:
Due to the
capability of
IEEE 802.3af
standard, the
POE-151 can
directly connect
with any IEEE
802.3af
end-nodes like
wireless access
point, IP phones
and Internet
camera where
support IEEE
802.3af In-line
Power over
Ethernet port.
The IEEE 802.3af
Injector and
Splitter
installation:
For a place hard
to find the
power inlet,
POE-151 and
POE-151S-5V/9V/12V,
as a pair,
should provide
the easiest way
to power your
Ethernet devices
such as PLANET
ICA-110,
Internet Camera
on the ceiling,
or WAP-4000,
Wireless Access
Point that is
installed on the
top of the
building. It's
the same with
the VIP-153PT,
IP phone used in
office or home.
Key
Features
Complies with IEEE 802.3af Power over Ethernet, IEEE 802.3/802.3u 10/100Base-TX
Provides DC 48V power over RJ-45 Ethernet cable to device with Ethernet port
LED indicators power input indication
Distance up to 100 meters
Auto-detect of POE IEEE 802.3af equipment, protect devices from being damaged by incorrect installation
Works with EIA568, category 5,4-pair cables for 10Base-T or 100Base-TX
EMI standards complies with FCC, CE class B
Ethernet
Connector
2 x
RJ-45
(1
for
data
+ DC
out,
1
for
Data
in)
Ethernet
Data
rate
10/100Mbps
(vary
on
Ethernet
device
attached)
Input
voltage
DC
48V,
0.4A
Number
of
device
can
be
powered
1
Ethernet
cable
TIA/EIA-568,
Category
5/5e
cable
LED
indicator
1 x
power,
1 x
POE
ready
/
in-use
Dimension
(W x
D x
H)
73 x
55 x
24
mm
EMI
FCC
Class
B,
CE
mark
Standard
Compliance
IEEE
802.3
Ethernet,
IEEE
802.3u
Fast
Ethernet,
IEEE
802.3af
Power
over
Ethernet.
Product
Application
